收藏本站
THIN FILM TYPE PAS CAPACITOR
■ PRECAUTIONS
1. Use under the maximum usable voltage.
When voltage which exceed the maximum usable voltage is applied, it might cause abnormal current flow, which shorten lifetime, and leakage, and sometimes
damages PAS capacitors.
2. Use under maximum operating temperature.
A capacitor using in over max operating temperature may lead to shorter life, leakage, and electrical damage by increasing internal pressure.
3. Limited life time.
Lifetime of PAS capacitor is greatly affected by surrounding temperature. 10℃ drop in temperature extends its expected lifetime approximately twice as
much.
Design a circuit under consideration of deterioration of electrical characteristics after long time usage, decreasing in capacitance and increasing in internal
resistance.
4. PAS capacitor's electrical characteristics might change depending on the surrounding temperature.
PAS Capacitor’s electrical characteristics might change depending on the surrounding temperature aside from aged deterioration.
Therefore, be sure to confirm the temperature performance before use product.
5. PAS capacitor has polarity.
PAS capacitor has polarity. Please check the polarity before use.
If a reverse voltage is applied, causing damage to the product.
6. Mind voltage drop when back-up.
When back-up (discharging) starts, voltage will drop because of active current and internal resistance.
7. Environment of usage.
In case PAS capacitor is used in high humidity, alkaline or acid air, it may cause deteriorating of its performance and short circuit by corrosion of outer can
or lead terminal. In addition, used in sudden temperature change or high humidity, it may cause deteriorating of its performance and electrolyte leak by dew
condensation.
8. Don’t apply shock and vibration or pressure.
PAS capacitor is sensitive to shock. Don’t drop PAS capacitor and not apply strong pressure to a body, terminals and lead. Soldering part or lead terminal
might be damaged if applying vibration, shock and stress such as pinch, tip, push and twist after installed.
9. Soldering
If next each item is not minded, it may cause deteriorating of its performance, leakage, shortening lifetime.
Don’t solder over solder conditions in the spec. sheet.
10. Cleaning condition when cleaning circuit-board after soldering.
Cleaning may affect PAS capacitor. Consult us about cleaning conditions beforehand.
Some cleaning conditions cause detrimental influence.
11. Storage.
Keep following cautions for storage of PAS capacitor.
● Don’t store in the high temperature, the high humidity condition and a place where receiving direct sunlight. Storing PAS capacitor in the room condition
of 10℃ - 35℃ and less than 65% relative humidity is recommended. Sudden temperature change or high humidity may cause deteriorating of its
characteristics and Soldering.
● Don’t store PAS capacitor near water, salt water or oil, and it the dew condensation, gasified oil or salinity filled place.
● Don’t store PAS capacitor in the hazardous gas (hydrogen sulfide, sulfurous, chlorine , ammonia, bromine, methyl bromine and etc).
● Don’t fumigate by halogen fumigant.
● Don’t store PAS capacitor near acid or alkaline solvent.
● Don’t store PAS capacitor in a place where exposed to ozone, ultraviolet or x-ray.
● Don’t store PAS capacitor in a place where vibration and shock might occur in.
? This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_pas_thinfilm_prec_e-E02R01
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
PAS409HR-VE5R CAP SUPER 30MF 3.3V COIN SMD
PC10HT-270 CAP SUPER 10F 2.2V RADIAL
PC625 BATTERY ODYSSEY SLA 12V
PCF0J470MCL1GS CAP ALUM 47UF 6.3V 20% SMD
PCG1C271MCL1GS CAP ALUM 270UF 16V 20% SMD
PCG1C821MCL1GS CAP ALUM 820UF 16V 20% SMD
PCJ0G182MCL9GS CAP ALUM 1800UF 4V 20% SMD
PCK0J821MCO1GS CAP ALUM 820UF 6.3V 20% SMD
相关代理商/技术参数
PAS-24VDC 制造商:KUHNKE 功能描述:RELAY 24 VDC
PAS250-4 功能描述:线性和开关式电源 250W 12V 21A RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度:
PAS250-4AG 功能描述:线性和开关式电源 250W 12V 21A RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度:
PAS250-4-AG 制造商:Tamura Corporation of America 功能描述:AC/DC Power Supply Single-OUT 12V 21A 130W 20-Pin
PAS250-5 功能描述:线性和开关式电源 RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度:
PAS250-5-AG 制造商:Tamura Corporation of America 功能描述:AC/DC Power Supply Single-OUT 15V 17A 130W 20-Pin
PAS250-6 功能描述:线性和开关式电源 RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度:
PAS250-6AG 功能描述:线性和开关式电源 250W 24V 5.4A RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度: